Filter
Top Products
Enhanced AutoArming™
If this feature is enabled and you forget to remotely arm your IntelliGuard 700, the
system will arm itself automatically (“passively”) 30 seconds after the vehicle doors are
closed. For your convenience, if you re-open any door(s) within the 30-second
countdown, AutoArming will restart from the beginning once all doors are closed. Your
IntelliGuard 700 includes all these additional Enhanced AutoArming features:
AutoArming enable/disable: If you prefer, you may deactivate or reactivate
the AutoArming feature. See
User-selectable features
on pages 19–21.
Visual acknowledgment: Five seconds after you exit the vehicle and close all
the doors, the parking lights will flash twice to confirm that the AutoArming
countdown is progressing. Then, 25 seconds later, the system will AutoArm.
User-selectable entry delay: If you temporarily lose the use of your remote
controls, you may turn on the 15-second entry delay feature. This allows you to
silently disarm the system by starting the engine within 15 seconds of opening the
door. See User-selectable features on pages 19–21.
AutoArm & Lock: To ensure you can’t accidentally lock your keys inside the
car, the system is factory-set not to lock the doors upon AutoArming. To change
this setting, see User-selectable features on pages 19–21.
Instant AutoArming bypass: Prevents AutoArming when fueling the vehicle
and other times when you wish to temporarily bypass AutoArming. To activate
Instant AutoArming Bypass, rapidly turn the ignition switch to “ON” then “OFF.”
You will hear a single siren chirp to confirm that the system will not AutoArm.
The system reverts to its normal operating mode when you next start the engine.
Electronically Programmable Dual-Zone Magnetic Resonance Sensor™
Your IntelliGuard 700’s Dual-Zone Magnetic Resonance Sensor has both a primary and
a secondary zone. The secondary “warning” zone can detect someone forcefully leaning
against your vehicle or another car tapping your parked vehicle’s bumper. When this
occurs, the system will sound with a distinctive one-second warning tone. However, if
there is any genuine intrusion-related tampering, the system will sound its full siren
blast for 30 or 60 seconds (whichever you select, see User-selectable features on pages
19–21). What’s more, you can adjust the sensitivity of each of the two sensor zones via
your remote control. Use the Remote QuickAccess method noted on page 14 or see
User-selectable features on pages 19–21. For an even greater level of security, consider
Clifford Electronics optional sensors: IntelliSensor 3-D™ (a digital analysis glass
tampering sensor) and the Proximity Sensor™ (an interior passenger-compartment radar
sensor that detects anyone reaching inside your vehicle; the Proximity Sensor is
especially recommended if you own a convertible, T-top, soft-top or other open-top
vehicle).
13