Clifford concept 50 Automobile Alarm User Manual


 
Standard Features of the Concept 5O
(cont.)
Remote Door Locking/UnlockingNo more fumbling with keys in the dark
or bad weather. A single press of remote control button 1 simultaneously
arms the system and locks the doors, another press disarms and unlocks.
AutoLock — Automatically locks the doors when the ignition is turned “on”
AutoUnLock — Automatically unlocks when the ignition is turned “off”
Patented Smart AutoTesting
— Automatically tests all sensors and triggers
every time you remotely arm and specifically identifies any malfunction.
Patented Malfunction AutoBypass
— Automatically bypasses any trigger
or sensor malfunction and arms all other points to continue providing the
utmost possible protection.
TotalRecall— Non-volatile memory stores the identity of the last trigger
or sensor activated to provide diagnostic information.
Patented Smart Prior Intrusion Attempt Alert— Specifically identifies the
sensor or trigger activated by an attempted intrusion while you were away.
AutoArming— Automatically (passively) arms itself if you forget.
Visual Acknowledgment — The indicator lights flash twice to confirm
initiation of the 30-second AutoArming countdown.
User-Selectable Lock upon AutoArming — Allows you to set the system to
automatically lock the doors every time the system AutoArms.
Advanced CMOS Microprocessor— Commands and monitors all system
functions more than 1,000,000 times per second, yet draws less power
than your vehicle’s clock.
Remote Controlled Courtesy Lighting— Turns on your car’s interior lights
when you disarm and keeps them on for 30 seconds or until you start the
engine, whichever occurs first.
Built-In Indicator Light Flasher— Visually confirms alarm status from a
distance, and repeatedly flashes the indicator lights when the alarm is
tripped.
Control Unit with 4 Channels — For accessories such as a remote boot
release, power window control, memory seat activation, remote headlight
activation, even remote engine starting.
4