Clifford concept 50 Automobile Alarm User Manual


 
Standard Features of the Concept 5O (cont.)
Failsafe MultiPoint Autoimmobiliser— Automatically ensures that your
vehicle is completely immobilised while you’re away. While armed, your
Concept 50 electronically disconnects your vehicle’s ignition system,
starter motor and electric fuel pump, making theft virtually impossible.
What’s more, even if a thief were to tear the Concept 50 control unit out
of your vehicle, he would
still
be unable to start the engine! And
Clifford’s Failsafe circuitry assures your safety by making sure that the
immobilisation electronics cannot be activated while driving, even if the
system fuse were to blow.
Remote Headlight Activation Capability
— Remotely turn on the head-
lights to illuminate your way to and from your car for any duration you
wish between one second and two minutes (requires an optional relay).
Remote Window and Sunroof Closure Capability
— On certain vehicles
(including several models of BMW, Volkswagen and Jaguar), the addition
of an optional relay enables the system to fully close all the power windows
and sunroof every time you arm the system with its remote control.
Dual-Sensor Protection— Provides double the security via these two
high-technology Clifford sensors:
The system’s Glass Tampering Sensor detects any attempts to break any of
the vehicle’s windows.
The Volumetric Radar Sensor will immediately activate the alarm if anyone
reaches into your vehicle’s passenger compartment. Unlike ultrasonic
sensors, the Volumetric Radar Sensor is impervious to wind and temperature
variations, guarding your vehicle even if the windows are left open.
Remote Controlled Sensor Override— Just a press of a button on your
remote control instructs the system to override both sensors. It’s perfect
for those times when you need to leave a passenger or pet in the vehicle.
Dual-Mode Chirp Silencing— Whenever you remotely arm or disarm, the
siren “chirps” and the indicator lights flash. Whenever you wish, you may
silence the chirps with either of these two methods:
Remote chirp muting — Just press button 3 to silently arm and disarm.
Long-term chirp silencing — A few flicks of a switch is all it takes to silence
the chirps until you choose to reactivate them.
3