Filter
Top Products
Standard Features of the Bullet II (cont.)
✔ Patented Smart Prior Intrusion Attempt Alert — When you return to your
vehicle and remotely disarm your Bullet II, a special chirp and parking
light flash sequence will audibly and visually alert you from a distance if
an intrusion attempt was foiled while you were away. Your Bullet II will
even identify the specific trigger or sensor that detected the intrusion
attempt.
✔ Patented Remote Control Code Learning — Just a few flicks of a switch
lets you match to the system up to 4 different 12-channel Clifford ACG
remote controls. Just as easily, a lost or stolen remote control can be
deleted from the system memory.
✔ Control Unit with 6 Channels — For remote controlled system operation
and accessories.
✔
Advanced CMOS Microcomputer
—Very large scale integration (VLSI)
microprocessor commands and monitors all system functions more than
1,000,000 times per second, yet it draws less power than the vehicle’s
clock, so it won’t deplete your car battery like other alarms.
✔ Selectable Starter/Ignition Interrupt— You may choose either a fault-proof
mode, which lets you start the engine even in the unlikely event of a
system malfunction, or ultra-secure mode that ensures a thief won’t be
able to start the vehicle even if he finds the system control unit and
disconnects it!
✔ Hood/Trunk Trigger Input — For full perimeter protection of the engine
compartment and trunk contents (may require optional pin switches).
✔ High-Luminescence LED Status Indicator — Adds visual deterrence and
identifies system status.
✔ Patented SmartPowerUp™ II — When power to the system is
disconnected, the system’s non-volatile memory always remembers the
last state (armed, disarmed or valet mode) and returns to that state when
power is restored. So if a thief disconnects the power and then restores it
in an attempt to start the car, the system will re-arm and instantly sound
the siren while immobilizing the vehicle.
6