Filter
Top Products
Anti-CodeGrabbing™ (ACG) with Random Code Encryption
A Clifford exclusive that protects you and your automobile from the most effective
and onerous car stealing device ever used by car thieves — a code-grabber.
Code-grabbers are far more effective and efficient than scanning. Unlike scanners
that sequentially transmit one digital code after another until they hit the correct
code to disarm the alarm (a process that may take minutes to years depending on the
system’s total number of codes), code-grabbers literally record, from hundreds of
feet away, the code sent by your car alarm remote control. Then the thief simply
plays back the code when you’re gone, instantly disarming the alarm and unlocking
the doors. It’s like giving the thief your car keys. Non-Clifford alarms can be
defeated that easily. In contrast, Clifford systems use complex digital signal
processing and unbreachable encryption to randomly change the digital code every
time you use the remote control. Your remote will never transmit the same code
twice, and the control unit will never accept the same code twice. Thus the code
recorded and played back by the thief’s code-grabber will never be accepted by your
Bullet II. Only ACG can make a car alarm impervious to code-grabbing, and only
Clifford systems have ACG with Random Code Encryption.
Enhanced AutoArming™
If this feature is enabled and you forget to remotely arm, the system will
automatically arm itself 30 seconds after the vehicle doors are closed. For your
convenience, if you re-open any door(s) within the 30-second countdown,
AutoArming will restart from the beginning once all doors are closed. Bullet II has
these additional AutoArming features:
AutoArming enable/disable: If you prefer, you may deactivate or reactivate
the AutoArming feature. See User-selectable features on pages 15-16.
Visual acknowledgment: Five seconds after you exit the vehicle and close all
the doors, the parking lights will flash twice to confirm that the AutoArming
countdown is progressing. Then, 25 seconds later, the system will AutoArm.
AutoArm & Lock: To ensure you can’t accidentally lock your keys inside the
car, the system is factory-set not to lock the doors upon AutoArming. To
change this setting, see User-selectable features on pages 15-16.
Instant AutoArming bypass: Prevents AutoArming when fueling the vehicle
and other times when you wish to temporarily bypass the AutoArming
feature. To activate Instant AutoArming Bypass, rapidly turn the ignition
switch to “ON” then “OFF” twice. You will hear a single siren chirp to
confirm that the system will not AutoArm. Your Bullet II will revert to its
normal operating mode when you next start the engine.
10