Filter
Top Products
TO ARM
THE SYSTEM . . . . . . .
Press button 1 (channel 1) once. You will hear
two chirps
and the
side lights will flash twice. The dashboard LED will flash
repeatedly and the car doors will automatically lock. On certain
vehicles, if so wired, the power windows and sunroof will
automatically close.
TO DISARM
THE SYSTEM . . . . . . .
Press button 1 (channel 1) again.
One chirp
and one side light
flash confirms disarming. The doors will unlock and the interior
lights will turn on and stay on for 30 seconds or until you start the
engine, whichever occurs first. In addition, the system automatically
adjusts the driving position to the settings you have programmed
into your car’s memory seat button (see page 20 for further details).
TO SILENTLY
ARM OR DISARM
THE SYSTEM . . . . . . .
Press button 3 (channel 3). Your AvantGuard III system will arm
or disarm with all the indications noted above except for the chirp
acknowledgments.
TO ACTIVATE
THE PANIC
FEATURE . . . . . . . . . .
Press button 1 for three seconds. The lights will flash repeatedly
and the siren will blare for 30 or 60 seconds (user-selectable), or
until you press button 1 again to turn it off. If the ignition is on
(indicating you are in the car), the doors will automatically lock to
prevent an assailant from entering. If the ignition is off, the doors
will unlock, allowing you to enter without fumbling with your keys.
TO REMOTELY
TURN ON THE
HEADLIGHTS . . . . . .
Button 2 (channel 2) controls an electronic interlock that lets you
separately command
two
options with the same channel:
one when
the system is armed and another when disarmed
. Pressing button 2
while the alarm is
armed
will turn on the headlights for any
duration you wish between one second and two minutes (factory
setting is 30 seconds; see
User-selectable features
on pages 31-35).
TO REMOTELY
OPEN THE
TRUNK RELEASE . . . .
Button 2 (channel 2) can control an optional remote boot release
when the system is
disarmed
. Pressing button 2 while the alarm is
disarmed
will open the boot if you have this option installed.
TO REMOTELY
START OR
SHUTDOWN
THE ENGINE . . . . . . . .
Before attempting to remotely start the engine, please read the
sections Remote Engine Starting and Remote Starting DOs and
DON’Ts on pages 28-30. Channel 5 (LevelShift once, then button
1) instructs your AvantGuard III to remotely start your vehicle’s
engine and any preset accessories (or to shut the engine down if it
is already running under the control of your AvantGuard III).
The side lights will flash twice to acknowledge your command,
then will light and stay lit while the engine idles for on-going
confirmation.
16