Clifford AvantGuard III Automobile Alarm User Manual


 
Security and Additional Convenience Features
(cont.)
A Pair of Remotely Adjustable Dual-Zone Sensors — Both a Digital
Dual-Zone Proximity Sensor IV and a Dual-Zone Piezo Sensor giving four
times the protection.
n Digital Dual-Zone Proximity Sensor IV — The two sensor zones provide full
perimeter protection: If someone is lurking near your car, the system sounds a
one-second warning tone, but if a thief leans into the passenger compartment
through an open window, the system instantly blasts the siren, flashes the side
lights and immobilises the starter and ignition system. You can adjust, test and set
sensitivity of each zone of this efficient microprocessor-controlled passenger
compartment sensor via a few presses on the remote control. To minimise current
draw, this new-generation radar sensor uses only 30% of the power required by
other radar sensors, yet provides better sensitivity and far more precise
discrimination between genuine threats to your vehicle and everyday
environmental conditions that cause other radar sensors to false alarm.
n Dual-Zone Piezo Sensor — Just like the Digital Dual-Zone Proximity Sensor IV,
you can adjust and test sensitivity of each zone of this all-electronic
vibration/impact sensor via the remote. Unlike other vibration/impact sensors, the
sensitivity of the Dual-Zone Piezo Sensor stays where you set it regardless of time
or temperature. The warning zone of the Dual-Zone Piezo Sensor has a different
sound than that of the Dual-Zone Proximity Sensor for distinct identification.
n Tonal Confirmation of Remote Sensor Adjustments — For the utmost in sensitivity
adjustment ease and instant feedback, just press a few buttons on the remote to
adjust the sensitivity of each zone of each of the two system sensors.
That’s all
there is to it! Higher and higher pitched tones confirm each sensitivity increase,
lower and lower tones confirm each decrease.
n 32/16-Step Incremental Sensitivity — For fine-tuning accuracy, each of the two
zones of the Digital Dual-Zone Proximity Sensor IV has a 32-step adjustment
range, as does the alarm zone of the Dual-Zone Piezo Sensor. The Piezo Sensor’s
less critical warning zone utilises 16 steps for adjustment speed and accuracy.
n
Adjust and Test Unobtrusively — No repeated arming and disarming, and no siren
wailing. You set, adjust and test sensitivity of each sensor and each sensor zone
without activating the alarm!
n
Remote Override of Each Proximity Sensor Zone — One press of a button on the
remote control overrides the Proximity Sensor IV’s perimeter warning zone when
you need to park in an area with heavy pedestrian traffic. A second press turns off
both zones for those times when you must leave a passenger or pet in the vehicle.
SilentNight — This user-selectable feature automatically silences the normal
arm and disarm chirps at night, restores them in daylight.
QuietChirp— User-selectable soft or full-volume arm/disarm chirps.
8