Clifford AvantGuard III Automobile Alarm User Manual


 
Security and Additional Convenience Features
(cont.)
User-Selectable NightVision Headlight Automation — All electronics for
this popular accessory are built-in to provide all these great features:
n Safety Above All — You’ll never again accidentally drive in the dark without the
headlights on nor forget to turn the headlights off after parking. For your safety
and that of other motorists, when driving at twilight, the car’s headlights
automatically turn on at dusk and switch off at dawn.
n Precision Activation — The headlights are turned on or off only when necessary.
Briefly driving under a dark overpass in daylight or quickly passing through a
brightly lit area at night
will not
cause the headlights to switch on and off.
n User-Selectable Automatic Post-Parking Illumination — For your safety when
parking at night, the headlights will stay on for your choice of any duration
between one second and 2 minutes (factory preset to 30 seconds) to light your way
in the dark. If you prefer not to have any post-parking illumination, but do want all
the other NightVision features, this one particular feature can be programmed off.
n Complete User Control — The NightVision circuitry enhances headlight
operation without interfering with normal operation. At any time, you may use the
vehicle’s headlight switch to override NightVision and turn on the headlights even
in broad daylight.
n RainCheck — When the windscreen wipers are turned on, the AvantGuard III
automatically turns on the headlights to increase your vehicle’s visibility to all
other drivers on the road. And you’ll never have to worry about accidentally
leaving the headlights on after parking.
n
Built-In Remote Headlight Activation — Just a press on the remote instantly turns
on the headlights for any duration you wish between one second and two minutes.
Dual-Mode Chirp Silencing— When you remotely arm or disarm, the siren
“chirps”
and the side lights flash to confirm system status. Whenever you
wish, just a press on the remote will arm and disarm the system silently. It’s
perfect when parking at night in a quiet residential area. Or, if you prefer, you
can turn off the chirps on a long-term basis until you wish to turn them back on.
One-Step Reset of All User Features— A simple procedure using the
PlainView switch allows you to reset all user programmable features (except
programmed remotes and your secret valet code) to their factory presets.
Built-In Side Light Flasher — The side lights flash to confirm arming,
disarming, AutoArming countdown, remote valet entry and exit as well as
remote engine starting. For ongoing visual confirmation of engine idling, the
side lights stay on.
9