Clifford Arrow II Automobile Alarm User Manual


 
Standard Features of the Arrow II
(cont.)
Prior Intrusion Attempt Alert — When you disarm your Arrow II, a special chirp
and parking light flash sequence will audibly and visually alert you from a
distance if an intrusion attempt was foiled while you were away.
Patented Remote Control Code Learning — A few flicks of a switch lets you
match to the system up to three different Clifford remote controls, including the
optional 3-channel and/or 12-channel Anti-CodeGrabbing remote controls for the
ultimate protection against thieves with code-grabbers. Just as easily, a lost or stolen
remote control can be deleted from the system memory.
Fault-Proof Starter Interrupt— Your Arrow II system prevents an intruder from
starting the engine, but lets you start it even in the unlikely event of a system
malfunction.
High-Output SirenLoud siren wail. Arrow II also has Clifford’s Patented
Automatic Noise Abatement feature that limits alarm sounding to no more than 3
minutes even if a door is left open in the wake of an intrusion attempt. This
ensures against battery drain or towing of your vehicle due to noise pollution.
The system then automatically resets and re-arms all other points to provide the
utmost possible protection.
Hood/Trunk Trigger Input— For full perimeter protection of the engine
compartment and trunk contents (may require optional pin switches).
High-Luminescence LED Status Indicator
— Adds visual deterrence and
identifies system status.
Valet Mode — Permits vehicle servicing and valet parking without relinquishing
your remote control.
Patented SmartPowerUp™ II
— When power to the system is disconnected, the
system’s non-volatile memory always remembers the last state (armed, disarmed
or valet mode) and returns to that state when power is restored. So if a thief
disconnects the power and then restores it in an attempt to start the car, the
system will re-arm and instantly sound the siren while immobilizing the vehicle.
4