Filter
Top Products
15
© 2011 Directed Electronics. All rights reserved.
Timer Start*
Press and release
Activates (or if On, deactivates) Timer Start. The parking lights flash
quickly four times for On and slowly four times for Off. The Remote
Start LED and beeps play (1 for on, 2 for off) to confirm..
Note
System needs to be armed or Timer Start will not start the
engine.
AUX 2
Press and release AUX
Activates (or if On, deactivates) the Aux 2 output. The Aux LED and
On tones or Off tones play to confirm.
Arm Status
Press and hold the button
The remote will generate an output using the LED’s and beeps/tones
to display the systems Arm Status since its last update message or com-
mand operation. It will report status via ghost LED’s, beeps, and tones
as described in this section for Arm, Disarm, Valet mode arm, Valet
mode disarm, Sensor Silent arm, Full Silent arm.
* See Advance Start under Remote Start Features for details.