Clifford 520.4X Automobile Alarm User Manual


 
11
© 2011 Directed Electronics. All rights reserved.
triggered; the siren will chirp 4 or 5 times, and the Disarm LED,
LED and 4 or 5 fault tones play to alert of the report.
Remote Start
Press and release
Activates (or if On, deactivates) the remote starter. The engine and
parking lights turn On and the Remote start LED and On tones play,
or the engine and parking lights turn Off and the Remote start LED
and Off tones play to confirm. If a Remote start configuration issue
prevents the engine from starting, the
LED and a fault tone will play
while the parking lights flash a Remote Start fault report*** to identify
the fault.
AUX/Trunk
Press and hold AUX
The Trunk opens (if connected) when this button is pressed for 2 sec-
onds. The Aux LED and tones play to confirm.
* See Remote and System Operations for details.
** See Alarm Features for details.
*** See Remote Start Faults (under Remote Start Features) for details.
For Manual transmission vehicles see Manual Transmission Start in the
Remote Start Features
section for more details.