Filter
Top Products
7
©
2004 Directed Electronics, Inc.
Pressing for one second disarms the system. The horn will honk
twice and the parking lights (optional) will flash twice to confirm
disarming of the system. The optional Failsafe
®
Starter Kill will be
deactivated. The status LED will turn off, unless the system is pro-
grammed for Passive Mode. In Passive Mode, the status LED will
flash rapidly when the system is disarmed. This indicates that the
system will re-engage the starter kill in 30 seconds unless the igni-
tion is turned on.
If your remote transmitter is lost or damaged, you can manually
override the starter kill. To do this, you must have the vehicle's
ignition key and know where the Valet
®
switch is located. Be sure
to check with the installer for the location of the Valet
®
switch.
To override the starter kill, turn
the ignition on and press the
Valet
®
switch within 10 seconds.
The status LED will stop flashing
and the vehicle should start. If it does not start,
you may have waited too long; turn the ignition off and repeat the
process.
LOCATION OF VALET
®
SWITCH_____________________________
DRW-35
Disabling the Starter Kill Without a Transmitter
Disarming