Clarion NP401 GPS Receiver User Manual


 
English
Owner’s
Manual
32 NP401
5.1.2.3Enteringanaddresswithoutknowingthe
district/suburb
Long roads can run across several districts or
suburbs. You may not know what particular house
number is located where. In this case, follow the
instructions below:
The procedure is explained starting from the
Navigation menu.
1. Tap the following buttons: (Simple
mode), or , (Advanced mode).
2. By default, Clarion Mobile Map proposes the
country/stateandcitywhereyouare.Ifneeded,
tapthebuttonwiththenameofthecountry/
state, and select a different one from the list.
3. If needed, change the city:
•Toselectthecityfromthelistofrecentlyused
ones, tap the button.
•Toenteranewcity:
a) Tap the button with the name of the city, or
ifyouhavechangedthecountry/state,tap
.
b) Start entering the city name on the keyboard.
c) Get to the list of search results:
•Afterenteringacoupleofcharacters,the
names that match the string appear in a list.
•Tap to open the list of results
before it appears automatically.
d) Select the city from the list.
4. Enter the street name:
a) Tap .
b) Start entering the street name on the
keyboard.
c) Get to the list of results:
•Afterenteringacoupleofcharacters,the
names that match the string appear in a list.
•Tap to open the list of results
before it appears automatically.
d) Instead of selecting one of the streets, tap
.
5. nter the house number:
a) Tap .
b) Enter the house number on the keyboard. (To
enter letters, tap and select an
alphabetic keyboard layout. To enter symbols,
tap ).
c) Tap to finish entering the address.
6. A list appears with the matching addresses.
Tap the desired one.
7. The map appears with the selected point in
the middle. Tap (Simple mode) or
(Advanced mode) from the Cursor
menu. The route is then automatically calculated,
and you can start navigating.
5.1.2.4Selectinganintersectionasthedestination
The procedure is explained starting from the
Navigation menu.
1. Tap the following buttons: (Simple
mode), or , (Advanced mode).
NP401 OM_100920_EN.indd 32 2011-1-6 16:10:55