Filter
Top Products
Page 8 - MS2000 Owner’s Manual
Valet Mode
Allows you to temporarily disable the security system when the car is being service or turned over to a
parking attendant.
To turn Valet Mode on or off:
1. Turn on the ignition.
2. Press and hold the override switch.
3. While holding the override switch, turn off the ignition.
• The siren will chirp once to indicate you have turned Valet Mode on.
• The siren will chirp twice to indicate you have turned Valet Mode off.
4. Release the override switch.
While Valet Mode is on, the LED will light solid and you can continue to lock and unlock your doors with
the Remote Transmitters, as well as operate the Auxiliary Functions.
For added protection, when the doors are locked using the Remote Transmitter, the system’s Starter
Disable circuit will activate, and the LED will emit double flashes until the system is unlocked by the Remote.
If the Remote Transmitter is lost, stolen, or becomes inoperable while the car is locked in Valet Mode,
you can exit the Valet mode to deactivate the Starter Disable circuit.
Ignition Controlled Door Locking
For added convenience and safety, this feature automatically locks your car’s doors 10 seconds after
the ignition key is turned on.
To prevent you from accidentally locking your keys inside the car:
• The system will not automatically lock the doors if a door is open when the ignition key is turned on.
• The system will not automatically lock the doors if a door is opened during the first 10 seconds after the ignition
key is turned on.
Ignition Controlled Door Unlocking*
For added convenience, this feature automatically unlocks your car’s doors after the ignition key is
turned off.
*For personal safety reasons, this feature can be turned off by your installer.
Dome Light Control
For increased safety and convenience this optional feature will automatically turn on the dome light
when you Disarm the system.
With this feature installed, the dome light will turn on for 20 seconds when the system is disarmed (or
unlocked in Valet Mode) using the Remote Transmitter.
Auxiliary Function Output
The system is equipped with an Auxiliary Function output that can be used to remotely control optional
features such as, electric trunk release, remote car starter, power windows, power sunroof, etc.
Other Features