Cisco Systems 12.2(35)SE Automobile Electronics User Manual


 
3
Release Notes for the Cisco Catalyst Blade Switch 3040 for FSC, Cisco IOS Release 12.2(35)SE
OL-12212-01
System Requirements
System Requirements
The system requirements are described in these sections:
“Hardware Supported” section on page 3
“Device Manager System Requirements” section on page 3
Hardware Supported
The hardware supported on this release is the Cisco Catalyst Blade Switch 3040 for FSC.
Device Manager System Requirements
These sections describes the hardware and software requirements for using the device manager:
“Hardware Requirements” section on page 3
“Software Requirements” section on page 3
Hardware Requirements
Table 1 lists the minimum hardware requirements for running the device manager.
Software Requirements
Table 2 lists the supported operating systems and browsers for using the device manager, which does not
require a plug-in. The device manager verifies the browser version when starting a session to ensure that
the browser is supported.
Note Windows NT and Windows 98 are no longer supported.
Table 1 Minimum Hardware Requirements
Processor Speed DRAM Number of Colors Resolution Font Size
Intel Pentium II
1
1. We recommend Intel Pentium 4.
64 MB
2
2. We recommend 256-MB DRAM.
256 1024 x 768 Small
Table 2 Supported Operating Systems and Browsers
Operating System Minimum Service Pack or Patch
Microsoft Internet
Explorer
1
1. Service Pack 1 or higher is required for Internet Explorer 5.5.
Netscape
Navigator
Windows 2000 None 5.5 or 6.0 7.1
Windows XP None 5.5 or 6.0 7.1