Filter
Top Products
18
Release Notes for the Cisco Catalyst Blade Switch 3040 for FSC, Cisco IOS Release 12.2(35)SE
OL-12212-01
Updates to System Message Guide
Error Message WCCP-5-SERVICEFOUND: Service [chars] acquired on WCCP Client
[IP_address]
Explanation Web Cache Communication Protocol (WCCP) has found a service on the specified
WCCP client. [chars] is the name of the service, and [IP_address] is the client IP address.
Recommended Action No action is required.
Error Message WCCP-1-SERVICELOST: Service [chars] lost on WCCP Client [IP_address]
Explanation
WCCP has lost the service associated with the specified WCCP client. [chars] is the
name of the service, and [IP_address] is the client IP address.
Recommended Action Verify the operational state of the WCCP client.
These system messages were updated in the system message guide:
Error Message EC-5-CANNOT_BUNDLE_LACP: [chars] is not compatible with aggregators in
channel [dec] and cannot attach to them ([chars]).
Explanation The port has different port attributes than the port channel or ports within the port
channel. [chars] is the incompatible port. [chars] is the short interface name, such as Gi1/0/1 on a
Catalyst 3750 switch, [dec] is the channel group number, and the last [chars] is the reason.
Recommended Action For the port to join the bundle, change the port attributes so that they match the
port.
Error Message EC-5-DONTBNDL: [chars] suspended: incompatible remote port with
[chars]
Recommended Action The configuration of the remote port differs from the configuration of other
remote ports in the bundle. A port can only join the bundle when its global configuration and the
configuration of the remote port are the same as other ports in the bundle. The first [chars] is the
suspended local interface, and the second [chars] is the local interface that is already bundled.
Error Message PORT_SECURITY-6-VLAN_REMOVED: VLAN [int] is no longer allowed on port
[chars]. Its port security configuration has been removed.
Explanation A configured VLAN has been excluded either due to a port-mode change or an allowed
VLAN list change and is removed from the configuration. [int] is the VLAN ID, and [chars] is the
switch port assigned to the VLAN.
Recommended Action No action is required.