•
Interconnecting Wiring
•
Knee Impact Bolster
•
Driver Inflatable Knee Blocker
•
Front Passenger Seat Occupant Classification System
(OCS)
−
Occupant Classification Module
−
Passenger Airbag Disabled (PAD) Indicator Light
−
Interconnecting Wiring
−
Bladder Assembly
−
Belt Tension Sensor
How The Airbag System Works
•
The Occupant Restraint Controller (ORC) determines
if a frontal collision is severe enough to require the
airbags to inflate. Based on the level of collision
severity, the front control module determines the
proper rate of inflation. The front airbag inflators are
designed to provide different rates of airbag inflation.
•
The ORC may modify the rate of inflation based on the
occupant size provided by the Occupant Classification
Module.
•
The ORC will not detect side, roll over, or rear impacts.
•
The ORC monitors the readiness of the electronic parts
of the system whenever the ignition switch is in the
START or RUN positions. These include all of the
items listed above except the steering wheel and
column, instrument panel and passenger knee bol-
sters. If the key is in the OFF position, in the ACC
position, or not in the ignition, the airbags are not on
and will not inflate.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49
2