Filter
Top Products
Fuse replacement
1. Before replacing a fuse, always turn off the electrical
item concerned and turn the ignition key to the “LOCK”
position.
2. Remove the fuse cover.
3. Referring to the fuse location diagrams and corre-
sponding tables, check the fuse that relates to the prob-
lem.
4. There is a fuse puller in the cover of the instrument
panel (driver’s side). Remove the fuse puller, clamp it on
the fuse you wish to remove, and pull the fuse straight
out from the fuse block. If the fuse is not blown, some-
thing else must be causing the problem; contact an
authorized dealer to have the problem checked.
N29C0020
OK Blown fuse
N29C0200
EMERGENCIES 287
8