2. Find your current location and variance zone number
on the zone map.
3. Press the display switch until the new zone number
appears in the display. After 5 seconds of inactivity, the
original item (Outside temperature/Compass) displayed
again.
NOTE
•
Do not attach ski racks, antennas, or any other object
to the vehicle by means of a magnet. Such magnets
will affect the operation of the compass.
•
If the compass deviates from the correct indication
soon after repeated adjustment, have the compass
checked at an authorized dealer.
•
The compass may not indicate the correct compass
point in the places shown below:
•
Vehicles in tunnels or parked in buildings
•
Expressways, near railroads, underneath railroad
cables, or over subways
•
Near transformer stations or high voltage power
lines
In these cases, the correct direction will be displayed once
the vehicle returns to a place where the earth’s magnetic
field is stable.
D11C0690
184 STARTING AND DRIVING