Filter
Top Products
To Vary The Speed Setting
There are two ways to change the set speed:
•
Use the accelerator pedal to adjust the vehicle to the
desired speed and press the SET - button.
•
Tap the RES + or SET - button to increase or decrease
the set speed in 1 mph (1 km/h) increments respec-
tively. Hold the RES + or SET - button for 5 mph
(10 km/h) increments.
To Cancel
The system will disable normal Cruise Control without
erasing the memory if:
•
You softly tap or depress the brake pedal.
•
You press the CANCEL button.
•
The Electronic Stability Control/Traction Control Sys-
tem (ESC/TCS) activates.
To Resume
Press the RES + button and then remove your foot from
the accelerator pedal. The EVIC will display the last set
speed.
To Turn Off
The system will turn off and erase the set speed in
memory if:
•
You push and release the ON/OFF button.
•
You turn off the ignition.
•
You switch off ESC.
•
You engage Four-Wheel Drive Low.
If the Cruise Control system is turned off and reactivated,
the system will return to the last driver setting (ACC or
Normal Cruise Control).
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187