Filter
Top Products
Getting to Know Your
6
Memory Driver Seat
(if equipped)
Your vehicle may be equipped with a
two-driver memory function that is used
to recall memory settings for the driver’s
seating positions for two drivers. The
Driver Information Center (DIC) can also
be programmed to personalize addition-
al functions. See the DIC section of this
guide for more details.
To Program: Adjust the driver’s seat
to the desired position. Press and hold
button “1” on the outboard side of the
driver’s seat for three seconds, until a
chime sounds and the position is stored.
For a second driver, repeat the proce-
dure using button “2.”
Recall Seat Position: With the vehicle
in PARK (P), press and release button 1
(or 2). A single chime will sound, and the
memory position will be recalled. To stop
memory feature movement at any time,
press one of the power seat controls or
memory buttons.
Remote Keyless Entry/Ignition Key
Recall: If programmed to do so through
the Driver Information Center (DIC), the
ignition key or the unlock button on the
remote keyless entry transmitter can be
used to recall memory seat and/or DIC
personalization settings. The number on
the back of the keyless entry transmitter
(1 or 2) corresponds to the number on
the seat’s memory controls. See the DIC
section of this guide for details.
See Sections 2 and 3 of your Owner Manual.
Outside Rearview Mirrors
Power Heated/Automatic Dimming
Heated (if equipped): The power mirror
control is located on the driver’s door.
Turn the knob toward the mirror you
wish to adjust, move the knob in the
direction you want the mirror to go, and
return the knob to the center position.
Both mirrors are heated when the rear
window defogger is activated, to remove
mist and fog.
Your vehicle may be equipped with
Automatic Dimming Heated Mirrors that
adjust for the glare of headlamps behind
you. Use the on/off settings on the auto-
matic dimming inside rearview mirror to
control them.
See Section 2 of your Owner Manual.