Filter
Top Products
Getting to Know Your
10
DISP (Display): Press this knob to
switch the display between the radio
station frequency and the time. For RDS
(see RDS), press this knob to select
what appears on the display, including
station name, RDS station frequency,
PTY and the name of the program
(if available).
AUDIO: Push and release this knob until
BASS or TREB appears on the display;
turn to increase or decrease. To set both
to the middle position, press and hold
the AUDIO knob until it beeps. To adjust
all tone and speaker controls to the mid-
dle position, push and hold the AUDIO
knob when no tone or speaker control is
displayed. ALL will appear on the dis-
play, and you will hear a beep.
Setting Stations: Six numbered push-
buttons let you program up to 18
stations (six each of AM, FM1 and FM2).
To program presets:
•Turn the radio on.
• Press BAND to select the band
(AM, FM1/FM2).
• Use the seek or tune knob to tune in
the desired station.
• Press AUTO EQ to select the equal-
ization that best suits the type of
station selected.
• Press and hold one of the six num-
bered buttons until a beep sounds;
release the button.
• Repeat for each numbered preset.
Radio Data System (RDS): Your RDS-
equipped radio has the capability to:
• Seek only radio stations with the pro-
gram types you prefer (such as Jazz,
Rock, News, etc.)
• Seek stations with traffic
announcements
• Receive announcements concerning
local and national emergencies
• Receive and display messages from
radio stations
RDS features work only on FM stations
that broadcast RDS information and
when they broadcast the signal. RDS
stations display their station name
instead of their frequency. Most RDS
stations also provide the time of day and
a Program Type (PTY).
ALERT!: Warns of local or national
emergencies. You will hear the
announcement even if the volume is
muted or a CD is playing. It cannot be
turned off. This feature is not affected by
tests of the Emergency Broadcast
System.
TRAF: Press this button to activate the
traffic announcement feature. TRAF
appears on the display if the tuned sta-
tion broadcasts traffic announcements.
If it doesn’t, the radio will seek a station
that does. If no station is found, NO
TRAF appears on the display. When a
traffic announcement comes on the
tuned station, you will hear it, even if the
volume is muted or a CD is playing.
INFO: If the current station has a mes-
sage, INFO appears on the audio dis-
play. Press this button to see the mes-
sage. Once the complete message has
been displayed, INFO disappears from
the display.
P-TYPE LIST: Turn the P-TYPE LIST
knob to select the Program Type you
want to listen to. Next, press the SEEK
TYPE button and the radio will seek the
first RDS broadcast of the selected
Program Type.