Filter
Top Products
Black plate (34,1)
Chevrolet Malibu Owner Manual - 2011
10-34 Vehicle Care
4. Turn the bulb socket (B)
counterclockwise to remove from
the lamp assembly.
5. Pull the bulb (A) from the
socket (B).
6. Install the new bulb.
7. Reverse Steps 1 through 4 to
reinstall.
License Plate Lamp
To replace the license plate
lamp bulb:
1. Remove the license plate bezel
assembly by turning the two
screws counterclockwise.
2. Turn and pull the license plate
lamp assembly forward through
the fascia opening.
3. Turn the bulb socket
counterclockwise and pull the
bulb straight out of the socket.
4. Push the new bulb in and turn it
clockwise to install.
5. Reverse Steps 1 through 3 to
reinstall.
Replacement Bulbs
Exterior Lamp
Bulb
Number
Back-up Lamp 921
License Plate Lamp 168
Rear Turn Signal
Lamp/Taillamp
(LS and LT)
3157K LL
Rear LED Turn
Signal Lamp/
Taillamp (LTZ)
GM P/N
25874489
For replacement bulbs not listed
here, contact the dealer.