Filter
Top Products
Black plate (45,1)
Chevrolet Impala Owner Manual - 2011
Instruments and Controls 5-45
Example of Eight Dip Switches
with Two Positions
Example of Eight Dip Switches
with Three Positions
The panel of switches might not
appear exactly as they do in the
examples above, but they
should be similar.
The switch positions on the
hand-held transmitter could be
labeled, as follows:
.
A switch in the up position
could be labeled as
“Up,” “+,” or “On.”
.
A switch in the down
position could be labeled as
“Down,” “−,” or “Off.”
.
A switch in the middle
position could be labeled as
“Middle,” “0,” or “Neutral.”
2. Write down the 8 to 12 switch
settings from left to right as
follows:
.
When a switch is in the
up position, write “Left.”
.
When a switch is in the
down position, write “Right.”
.
If a switch is set between
the up and down position,
write “Middle.”
The switch settings written
down in Step 2 will now
become the button strokes
to be entered into the
Universal Home Remote in
Step 4. Be sure to enter the
switch settings written down
in Step 2, in order from left
to right, into the Universal
Home Remote, when
completing Step 4.