Filter
Top Products
Black plate (21,1)
Chevrolet Tahoe/Suburban Owner Manual - 2010
Automatic Transfer Case
Two Speed
Transfer Case
Single Speed
Transfer Case
The transfer case knob is located next to the steering
column. Use this knob to shift into and out of the
different Four-Wheel Drive modes.
2
m (Two-Wheel-Drive High): This setting is used for
driving in most street and highway situations.
AUTO (Automatic Four-Wheel Drive): This setting is
ideal for use when road surface traction conditions are
variable.
4
m (Four-Wheel High): Use the Four-Wheel-Drive High
position when extra traction is needed, such as on
snowy or icy roads or in most off-road situations.
4
n (Four-Wheel-Drive Low): Vehicles with a
two speed transfer case have a Four-Wheel-Drive Low
position. This setting sends maximum power to all four
wheels. You might choose Four-Wheel-Drive Low if you
are driving off-road in deep sand, deep mud, deep
snow, and while climbing or descending steep hills.
N (Neutral): Vehicles with a two speed transfer case
have a N (Neutral) position. Shift the transfer case to
N (Neutral) only when towing the vehicle. See
Recreational Vehicle Towing
on page 5‑43
or Towing
Your Vehicle on page 5‑43.
See Four-Wheel Drive (Two Speed Automatic Transfer
Case)
on page 3‑41
or Four-Wheel Drive (Single
Speed Automatic Transfer Case) on page 3‑46.
1-21