Filter
Top Products
3. Extend the handle on the wheel wrench by
pressing the button and pulling on the end of the
wrench. You must do this before using the wheel
wrench.
Removing the Flat Tire and Installing
the Spare Tire
1. Do a safety check before proceeding. See
Changing a Flat Tire on page 6‑80.
2. If the vehicle has a wheel cover or hubcap that has
plastic wheel nut caps, loosen the plastic nut caps.
You might need to use the wheel wrench to loosen
them. Do not pry off wheel covers or center caps
that have plastic wheel nut caps.
3. Remove the wheel cover or center cap from the
wheel to locate the wheel nuts.
If the vehicle has a wheel cover or hubcap without
plastic wheel nut caps, gently pry on the edge of
the plastic wheel trim to remove it from the wheel
to locate the wheel nuts.
6-83