Chevrolet 2010 Malibu Automobile User Manual


 
Headlamps
The band on the lever located on the left side of the
steering column, operates the exterior lamps.
The exterior lamp control has the following four
positions:
2 (Headlamps): Turns on the headlamps, parking
lamps, and taillamps.
; (Parking Lamps): Turns on the parking lamps and
taillamps only.
AUTO (Automatic Headlamp System): Automatically
turns on the Daytime Running Lamps during daytime,
and the headlamps, parking lamps, and taillamps at
night.
P (Off/On): Turn the band to this position to turn on the
Automatic Headlamp System. In Canada, this position
only works when a vehicle is in the P (Park) position.
To turn on the Automatic Headlamp System, turn the
switch to off/on. To turn them off, turn the switch to
off/on again. This is a momentary control switch that
springs back when released. The Automatic Headlamp
System always turns on at the beginning of an ignition
cycle.
Headlamps on Reminder
If the driver's door is opened and the ignition is turned
off while leaving the lamps on, a warning chime will
sound.
Headlamps Off in Park
This feature works when the ignition is in the ON/RUN
position and it is dark outside. To turn the headlamps off
when it is dark outside but keep other exterior lights on,
turn the exterior lamp control to the parking lamp
position.
To turn on the headlamps along with the other lamps
when it is dark outside, turn the exterior lamp control to
the AUTO or headlamp position.
This function does not work for vehicles first sold in
Canada.
4-10