Filter
Top Products
License Plate Lamp
To replace one of these bulbs:
1. Remove the two screws holding each of the license
plate lamps.
2. Turn and pull the license plate lamp toward you
through the opening.
3. Turn the bulb socket counterclockwise and pull the
bulb straight out of the socket.
4. Install the new bulb.
5. Reverse Steps 1 through 3 to reinstall the license
plate lamp.
Replacement Bulbs
Exterior Lamps Bulb Number
Back-Up Lamps 921
Center High-Mounted
Stoplamp (CHMSL)
912
Front Parking/Turn
Signal Lamps
3157KX
Halogen Headlamps,
High/Low-Beam
9007 LL
License Plate Lamp and
Sidemarker
194
Stoplamp, Taillamp and
Turn Signal Lamps
3057KX
For replacement bulbs not listed here, contact your
dealer/retailer.
5-47