Filter
Top Products
2. Then keep turning the pressure cap and
remove it.
{CAUTION:
You can be burned if you spill coolant on
hot engine parts. Coolant contains
ethylene glycol and it will burn if the engine
parts are hot enough. Do not spill coolant
on a hot engine.
3. Fill the cooling system with the proper
DEX-COOL
®
coolant mixture, up to the base
of the filler neck. See Engine Coolant on
page 323 for more information about the
proper coolant mixture.
4. Rinse or wipe any spilled coolant from the
engine and the compartment.
5. Then fill the coolant recovery tank to the cold
fill line.
6. Install the coolant recovery tank cap and the
pressure cap. After a day or two of driving,
when the engine is cold, check the coolant
level in the recovery tank. If it is low, refill it
to the cold fill line.
If the coolant in the recovery tank is constantly
low, you should have a dealership service
department inspect the vehicle for leaks.
334