Filter
Top Products
2. Ensure that the safety belts are properly
stowed over the seatback in all three positions.
3. Reconnect the
rear center safety
belt latch plate
to the mini buckle,
if your vehicle
has this.
Make sure the safety belt label is facing the
same direction as the release button of
the mini buckle. Make sure the belt is not
twisted. Push and pull on the latch plate to
be sure it is secure.
4. Flip the bottom seat cushion back into place.
Push firmly on the seat cushion to make sure
it is secure.
When the seat is not in use, the seatback should
be placed in upright, locked position, and the
seat cushion should be in the down position.
Under Seat Storage
Your vehicle has under seat storage.
To get to the storage area, lift up on the tab
located in the center of the bottom seat cushion
where the seat cushion meets the seatback.
See Rear Storage Area on page 143 for more
information.
19