Filter
Top Products
Lap Belt
When you sit in the center seating position, you have a
lap safety belt, which has no retractor. The word
CENTER is on both the buckle and latch plate. Also, the
center buckle and latch plate are a different color than the
two outboard buckles and latch plates. To make the belt
longer, tilt the latch plate and pull it along the belt.
To make the belt shorter, pull its free end as shown
until the belt is snug.
Buckle, position and release it the same way as the lap
part of a lap-shoulder belt. If the belt is not long
enough, see
Safety Belt Extender on page 1-28
.
Make sure the release button on the buckle is positioned
so you would be able to unbuckle the safety belt
quickly if you ever had to.
1-25