Filter
Top Products
3. Install the lower filter by dropping it down into
the slot.
The grooves on the two filters must be lined up with
each other as well as with the ventilation housing
in order to install the filters properly. The tabs on the
filters should face outward towards you and
should be at the top of the filters. The arrows on the
filters should point to the driver’s side of the
vehicle.
4. Then line up the grooves of the second filter
with the lower one and slide it in on top of the
lower one.
5. Reverse the steps to remove the air filters and then
install new ones.
If you choose not to replace the filter after you remove
it, driving your vehicle without one will not cause
damage. However, the air will no longer be filtered.
3-25