Filter
Top Products
Rear Combination Lamps
A. Turn Signal Lamp
B. Back-Up Lamp
C. Brake Lamp
To remove the rear combination bulbs, do the following:
1. Remove the two screws from the combination
lamps. Gently pull the housing away from the
vehicle.
2. Turn the bulb socket counterclockwise and pull it
out of the lamp housing.
3. Pull the bulb straight out of the socket.
4. Reverse the previous steps to install a new bulb.
5. Reinstall the housing and the screws.
Driver’s Side Passenger’s Side
5-54