Chevrolet 2000 Automobile User Manual


 
2-5
Power Door Locks (If Equipped)
Press the power door lock switch located on the driver’s
door to lock or unlock both doors at once.
The power door lock switch works at all times, except
when lockout prevention (if equipped) is programmed.
The unlock switch only works when the ignition is in
RUN, ACC or Retained Accessory Power (RAP) is
active. (See “Retained Accessory Power” in the Index.)
Operating the power locks may affect the content
theft
-deterrent/alarm system (if equipped). See “Content
Theft
-Deterrent /Alarm System” in the Index.
Last Door Closed Locking (If Equipped)
If you have power door locks, you can program your
vehicle to delay the locking of the doors. This lets you
or your passengers exit the vehicle after you’ve pressed
the power door lock switch. All of the doors will lock
once everyone has gotten out of the vehicle and the
doors are closed.
When the power door lock switch is pressed, a chime
will sound three times, indicating that the last door
closed locking feature has been activated. Pressing
the power door lock switch again will lock the doors
immediately. Pressing the unlock switch will cancel
a previously requested last door closed locking.
Your vehicle is shipped from the factory with this
feature off. To turn this feature on, see “Feature
Customization” in the Index.