Filter
Top Products
However during the hottest days of
the summer the BRP XP-S™ 10W40
mineral oil (P/N 219 700 346) can be
used.
NOTE: For improved overall perfor-
mance and all season application, use
XP-S 5W40 synthetic oil (P/N 293 600
039).
XP-S 5W40 Synthetic Oil
(P/N 293 600 039)
SAE 0W30
SAE 5W30
SAE 10W30
XP-S 10W40 Mineral Oil
(P/N 219 700 346)
SAE 15W40
SAE 20W50
Temperature Range
50°C (122°F)
40°C (104°F)
30°C (86°F)
20°C (68°F)
10°C (50°F)
0°C (32°F)
- 10°C (14°F)
-20°C(-4°F)
-30°C (- 22°F)
Oil Level
CAUTION: Check level frequently
and refill if necessary. Do not over-
fill. Operating the engine with an
improper level may severely dam-
age engine. Wipe off any spillage.
vmo2006-014-019_a
RH SIDE OF ENGINE
With vehicle on a level surface and
engine cold, not running, check the oil
level as follows:
1. Unscrew dipstick then remove it
and wipe clean.
2. Reinstall dipstick (do not screw it
in).
3. Remove and check oil level. It
should be near or equal to the up-
per mark.
vmo2006-014-020_a
1. Full
2. Add
3. Operating range
To add oil, remove dipstick.
Place a funnel into the dipstick tube to
avoid spillage.
Add a small amount of recommended
oil and recheck oil level.
Repeat the operation until oil level
reaches the dipstick's full mark. Do
not overfill.
Properly tighten dipstick.
76
______________________