Can-Am DS250 Offroad Vehicle User Manual


 
Obstacles in the “trail” should be traversed with caution. This includes loose
rocks, fallen trees, slippery surfaces, fences, posts, and embankments and de-
pressions. You should avoid them whenever possible. Remember that some
obstacles are too large or dangerous to cross and should be avoided. Small rocks
or fallen trees may be safely crossed... approach at a 90° angle. Stand on the
footrests while keeping your knees flexed. Adjust speed without losing momen-
tum and do not “gun” the throttle. Hold handlebar firmly. Place your body weight
rearwards and proceed. Do not try to lift the vehicle front wheels off the ground.
Be aware that the object may be slippery or may move while crossing.
When driving on hills or slopes two things are highly important... be prepared
for slippery surfaces or terrain variations and obstacles and... use proper body
positioning.
Uphill
Keep your body weight forward towards the top of the hill. Keep your feet on
the footpegs and shift into low gear then accelerate and when necessary, change
gear quickly as you climb. Do not over-speed since this may cause the front of
the vehicle to lift from the ground and fall back on you. If the hill is too steep
and you cannot proceed or the vehicle begins to roll backwards, apply the brake,
being careful not to slide. Dismount then use the “U” turn or “K” turn (while
walking back, next to the vehicle on the up hill side and with a hand on the brake
lever, slowly back the rear of the vehicle toward the top of the hill then drive
downhill). Always walk or dismount on the upside of the slope while keeping
clear of the vehicle and its rotating wheels. Do not try to hold on to the vehicle if
it begins to topple. Stay clear. Do not ride over the crest of the hill at high speed.
Obstacles, including sharp drop-offs, may exist.
V00A0XL
50
___________
SAFETY INFORMATION
___________