Filter
Top Products
vmo2006-013-007_a
1. Release locking tab
2. Pull on connector using a wiggle movement
Unlock bulb holder by turning it coun-
terclockwise.
Replace bulb.
Properly reinstall removed parts in the
reverse order of their removal.
Adjust Beam Aiming as Follows:
Turn knob to adjust beam height ori-
entation to your convenience. Adjust
both headlamps evenly.
vmo2006-013-007_b
1. Beam height adjustment
Taillight
Unscrew lens screws to expose bulb.
V06G0UY
1
2
1. Lens
2. Screws
Push bulb in and hold while turning
counterclockwise to release.
Install the new bulb by first pushing
in while turning clockwise. Reinstall
lens.
112
_____________________