Filter
Top Products
16
POWER FRONT SEATS
Seat Adjustments
A. Seat Cushion Adjustment
Move the front horizontal control to move the seat forward or
rearward, or to tilt, raise or lower the seat.
B. Seatback
Adjustment
Move the vertical
control to recline
or raise the
seatback.
C. Lumbar
Adjustment
Move the rear
control fore/aft to
increase/decrease
lumbar support or
up/down to raise/lower the lumbar location.
Set Memory Positions
1. With the vehicle in Park, adjust the power driver’s seat, power
adjustable pedals, power outside mirrors, and power tilt/tele-
scopic steering column to the desired positions.
2. Press and release the SET button and then press and hold
button 1 on the driver’s door until a beep sounds.
3. Repeat the steps using button 2 for a second driver.
Set Exit Position
1. Adjust the power
driver’s seat,
power adjustable
pedals, and the
power tilt/tele-
scopic steering
column to the
desired positions.
2. Press and release
the SET button
and then press
and hold the
EXIT button on the driver’s door until a beep sounds.
Recall Positions
With the ignition on and the vehicle in Park, press and release
button 1 or 2 or the button to recall the stored position.
With the ignition off or when the vehicle is not in Park, press
and hold button 1 or 2 or the button until the stored position
is reached. Releasing the button before the stored position is
reached stops the recall.
Note: To change the memory recall and exit settings, go to Comfort and
Convenience in the Vehicle Settings menu.
See Seats and Restraints in your Owner Manual.
A
C
B