Filter
Top Products
11
VOICE RECOGNITION
Control the music source and navigation destination, and make
phone calls hands-free (after pairing your Bluetooth-enabled
phone), using the voice recognition system.
1. Press the Push to Talk button on the steering wheel.
2. The radio will say “Command please,” followed by a tone.
3. After the tone, say what you want it to do using natural speech.
• Hands-free calling:
Example command: “Call Amanda” or “Dial 555-1212”
• Media music device search (when connected to USB only):
Example command: “Play artist [name]” or “Play song [name]”
• Radio control:
Example command: “Tune FM 104.3” or “Tune XM Classic
Vinyl”
Example command: “Tune Pandora” (Pandora app required)
• Help:
Say “Help” for voice recognition assistance.
Handset Voice Recognition
Handset Voice Recognition pass-thru allows access to the voice
recognition commands on a compatible, paired cell phone, i.e.
Siri or Voice Command. For more information, visit
www.gmtotalconnect.com.
To activate Handset Voice Recognition, touch the
Microphone on the CUE touch screen.
See your CUE Infotainment System Manual.
BLUETOOTH
®
SYSTEM
Refer to your Owner Manual for important safety information about using
the Bluetooth system while driving.
Before using a Bluetooth-enabled device in the vehicle, it must be
paired with the in-vehicle Bluetooth system. The pairing process is
disabled when the vehicle is moving. Not all devices will support all
functions. For more information, visit www.gmtotalconnect.com.
Pair a Phone
1. To use voice recognition, press the Push to Talk button;
after the tone, say “Pair Phone,” or
Use the touch screen to select
Phone > Pair Device.
2. Start the pairing process on the phone. Locate Cadillac CUE on
the phone.
3. Enter the four-digit code that appears on the touch screen
into the phone or, if a six-digit code
appears on the phone, conrm it on
the touch screen.
4. If your phone prompts you to accept
the connection or phone book down-
load, click “yes” and always allow.
Streaming Audio
With a paired device connected via Bluetooth, touch Media
until Bluetooth is displayed on the touch screen to stream audio
from the device.
Control operation using the device controls. For full control of the
mobile device, it may be necessary to connect the device to a
USB port.
See your CUE Infotainment System Manual.
♦ Optional equipment