Filter
Top Products
Black plate (39,1)
Cadillac SRX Owner Manual - 2011
Vehicle Care 10-39
3. Remove the connector lock (B)
located at the bottom of the
sensor connector (C).
4. Press on the top and bottom of
the sensor connectors (C) and
remove.
5. Lift the three retaining clips (D)
on the air filter housing.
6. Turn and tilt cover slightly
upwards and slide cover away
from outside edge of vehicle.
Lift the cover away from base.
7. Lift the air cleaner/filter base to
disengage from three pins.
Low-Beam Headlamps/Daytime
Running Lamps (DRL),
High-Beam Headlamps (Base)
1. From the back side of the
headlamp assembly, remove the
top cap to replace the low-beam
headlamp/DRL bulb.
2. From the back side of the
headlamp assembly, remove
the bottom cap to replace the
high-beam headlamp bulb.
3. Disconnect electrical connector.
4. Remove the bulb socket from
the headlamp assembly.
5. Replace the bulb in the bulb
socket.
6. Install the bulb socket in the
headlamp assembly.
7. Connect the electrical connector.