Cadillac 2011 DTS Automobile User Manual


 
Black plate (100,1)
Cadillac DTS Owner Manual - 2011
To use a portable audio player, connect a 3.5 mm
(1/8 inch) cable to the radio's front auxiliary input
jack. When connecting an auxiliary device, the radio
automatically detects the device and Aux Input Device
displays. The device begins playing audio over the
vehicle speakers. If an auxiliary device has already
been connected, the device does not begin playing
audio until the radio's CD/AUX button is pressed.
O (Power/Volume): Turn to increase or decrease the
volume of the portable player. You might need to do
additional volume adjustments from the portable device.
BAND: Press to listen to the radio when a portable
audio device is playing. The portable audio device
continues playing, so you might want to stop it or power
it off.
CD/AUX (CD/Auxiliary): Press to play a CD when
a portable audio device is playing. Press again and
the system begins playing audio from the connected
portable audio player. If a portable audio player is not
connected, No Aux Input Device Found displays.
Using an MP3
MP3/WMA CD-R or CD-RW Disc
The radio plays MP3 and WMA files that were recorded
on a CD-R or CD-RW disc. The files can be recorded
with the following fixed bit rates: 32 kbps, 40 kbps,
56 kbps, 64 kbps, 80 kbps, 96 kbps, 112 kbps,
128 kbps, 160 kbps, 192 kbps, 224 kbps, 256 kbps, and
320 kbps or a variable bit rate. Song title, artist name,
and album can display when files are recorded using
ID3 tags version 1 and 2.
Compressed Audio
The radio also plays discs that contain both
uncompressed CD audio (.CDA files) and MP3/WMA
files. By default the radio reads only the uncompressed
audio and ignores the MP3/WMA files. Pressing the
CAT button toggles between compressed and
uncompressed audio format.
MP3/WMA Format
If you burn your own MP3/WMA disc on a personal
computer:
.
Make sure the MP3/WMA files are recorded on a
CD-R or CD-RW disc.
.
Do not mix standard audio and MP3/WMA files on
one disc.
4-100