Filter
Top Products
Black plate (88,1)
Cadillac DTS Owner Manual - 2011
The radio clock and analog clock are not synchronized.
Occasionally you might need to set the digital radio
clock using the procedure below to synchronize both
clocks.
For a Six-Disc CD Player
To turn the radio clock display on or off:
1. Turn the radio on.
2. Press the MENU button until
H is displayed
3. Press the pushbutton located under
H until the
clock and date settings appear.
4. Press the pushbutton located under the forward
arrow tab until the menu for default clock and date
settings appear.
5. Press the pushbutton located under the currently
displayed status of either ON or OFF. The ON
display indicates the radio clock display is disabled
and the OFF display indicates the radio clock
display is enabled. Press this pushbutton to toggle
the radio clock display on or off.
If the radio clock display is turned on, the screen
displays Radio Clock ON for 10 seconds, then
returns to the original clock display menu.
If the radio clock display is turned off, the screen
displays Radio Clock OFF for 10 seconds. The
menus for clock and date settings are removed,
and ON displays as a current status indicating that
the clock display can be turned on, if desired.
Setting the Time and Date
For the Single CD Player
This type of radio has a H button for setting the time
and date. To set the time and date:
1. Turn the radio on.
2. Press
H and HR, MIN, MM, DD, YYYY (hour,
minute, month, day, and year) displays.
3. Press the pushbutton located under any one of
the tabs that you want to change. Every time the
pushbutton is pressed again, the time or the date if
selected, increases by one.
.
Another way to increase the time or date, is to
press the right SEEK arrow or the
\ FWD
button.
.
To decrease the time or date, press the left
SEEK arrow or the
s REV button. You can
also turn the
a knob, located on the upper
right side of the radio faceplate, to adjust the
selected setting.
4-88