Filter
Top Products
3. Unwrap the sealant filling hose from the
compressor.
4. Turn the sealant canister so the inflator filling hose
is aligned with the slot in the compressor.
5. Lift the sealant canister from the compressor and
replace with a new sealant canister. See your
dealer/retailer for more information.
To install a new sealant canister:
1. Align the sealant filling hose with the slot in the air
compressor.
2. Push the sealant canister down and turn it
clockwise.
3. Wrap the sealant filling hose around the air
compressor channel to stow it in its original location.
4. Push the air compressor inflator hose onto the
sealant canister inlet and push the lever down.
Changing a Flat Tire
If you have an STS-V model, there is no spare tire and
no tire changing equipment. Your vehicle is equipped
with run-flat tires. See Run-Flat Tires (STS-V) on
page 5-65 for more information. If you have an STS
model, your vehicle may be equipped with a tire inflator
kit. See Tire Sealant and Compressor Kit on page 5-87
for more information. If your vehicle is not equipped
with a tire inflator kit, follow the directions for changing a
flat tire in this section.
If a tire goes flat, avoid further tire and wheel damage
by driving slowly to a level place. Turn on your vehicle’s
hazard warning flashers. See Hazard Warning Flashers
on page 3-6 for more information.
5-96