Filter
Top Products
Playing the Radio
O
(Power): Press to turn the system on and off.
n (Volume): Turn clockwise or counterclockwise to
increase or to decrease the volume.
SRCE (Source): Press to select a source, either radio
or CD. The CD must be loaded to select the source
and to play. CD displays if a CD is loaded. If a CD is
not loaded, the display does not change from the
radio source.
Finding a Station
BAND: Press to select FM1, FM2, AM, or XM1
or XM2 (if equipped).
w (Tune): Turn to select radio stations.
©¨(Seek): Press the left arrow to go to the
previous station and stay there. Press the right arrow
to go to the next station and stay there. The sound
mutes while seeking.
The radio seeks stations only with a strong signal
that are in the selected band.
©¨ (Scan): Press the arrows to enter scan mode.
SCAN displays. Press the arrows to scan the next
station. The radio goes to a station, plays for
five seconds, then goes to the next station. Press
the arrows again to stop scanning.
To scan preset stations, press and hold the arrows for
more than two seconds until a beep sounds and PSCAN
displays. The radio goes to the first preset station,
plays for five seconds, then goes to the next preset
station. Press the arrows again to stop scanning presets.
The radio only scans stations with a strong signal that
are in the selected band.
AF (Alternate Frequency): This feature lets you turn
the Alternate Frequency feature on or off. See Alternate
Frequency under, “Activating Program Type (PTY)
Stations” later in this section for more information.
A LOCAL/DISTANT Selection: With this feature the
radio can be set to search for local stations or stations
that are further away for a larger selection.
3-101