Filter
Top Products
CD Messages
If the CD comes out, it could be for one of the following
reasons:
• If it is very hot. When the temperature returns to
normal, the CD should play.
• If you are driving on a very rough road. When the
road becomes smoother, the CD should play.
• The CD is dirty, scratched, wet, or upside down.
• The air is very humid. If so, wait about an hour and
try again.
• The format of the CD might not be compatible. See
Using an MP3 on page 3-112 later in this section.
• There could have been a problem while burning
the CD.
• The label could be caught in the CD player.
If the CD is not playing correctly, for any other reason,
try a known good CD.
If any error occurs repeatedly or if an error cannot be
corrected, contact your dealer/retailer. If the radio
displays an error message, write it down and provide it
to your dealer/retailer when reporting the problem.
Configurable Radio Display Keys
The four keys, located on each side of the radio display,
can be configured to make it easier to adjust the radio
features and other non-radio related features can also
be customized.
To program the configurable radio display keys,
perform the following steps:
1. Press the
w knob to enter the main menu.
2. Turn this knob until SETUP displays.
3. Press this knob to enter into SETUP.
4. Turn the same knob until CONFIGURE
DISPLAY KEYS displays.
5. Press this knob to enter into CONFIGURE
DISPLAY KEYS.
6. Turn this knob to select which of the four
configurable keys you would like to change.
The currently assigned feature displays.
7. Press the same knob to select the configurable
key to change.
8. Turn this knob to find the feature that will be
stored to the key.
9. Press this knob when you have found the feature
to be stored. The display updates, by showing
the symbol of the feature selected next to the
configurable key.
10. Repeat the previous steps for each configurable key.
3-111