Filter
Top Products
The Forward Collision
Alert (FCA) controls are
located on the end of
the multifunction lever.
9(Off): This position turns the system off.
R(On): This position turns the system on.
To enable FCA, move the Adaptive Cruise Control
switch to on. To disable FCA, move the switch to off.
Make sure the Head-Up Display is on and properly
adjusted. If the HUD is not on, FCA will not be
enabled and you will not be provided with FCA audible
and visual warnings. See Head-Up Display (HUD)
on page 3-43 for more information.
{CAUTION:
• On winding roads, FCA may not detect
a vehicle ahead. You could crash into
a vehicle ahead of you. Do not rely on
FCA on winding roads.
• When weather limits visibility, such as in
fog, rain, or snow, FCA performance is
limited. There may not be enough warning
distance to the vehicle in front of you. Do
not rely on FCA in low visibility conditions.
{CAUTION:
When FCA is enabled, the Adaptive Cruise
Control switch is on. If you press another
Adaptive Cruise Control button, you might
go into cruise when you do not want to.
You could be startled and even lose control.
Be careful not to press adaptive cruise buttons
unless you want to use cruise control.
3-11