Bushnell NAV500 GPS Receiver User Manual


 
connected again, the LED will remain orange for approximately 30
minutes before changing to green.
z Before first use, the device needs to be charged for at least 8
hours.
z Before first use, please make sure that the hardware reset switch
is in the correct position. Leave in this position from then on.
z To switch the device on, press the power button for one second.
To switch off, hold the power button for 3 seconds.
z Do not allow the device to get damp or wet
z Only use the supplied stylus to avoid scratching the screen
The navigation information offered by this device is for reference only.
As map and POI data may change, we cannot guarantee information on
this device is always 100% up-to-date. We will endeavor to reflect the
latest information available, users are advised to use with care and
caution.
Disposal of Used Electrical & Electronic Equipment The meaning of the symbol on the product, its accessory or packaging
indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable
collection point for the recycling of electrical & electronic equipments waste. In the European Union and Other European
countries which there are separate collection systems for used electrical and electronic product. By ensuring the correct
disposal of this product, you will help prevent potentially hazardous to the environment and to human health, which could
otherwise be caused by unsuitable waste handling of this product. The recycling of materials will help conserve natural
resources. Please do not therefore dispose of your old electrical and electronic equipment with your household waste. For
more detailed information about recycling of this product, pleas contact your local city office, your household waste e
disposal service or the shop where you purchased the product.