Bush Hog TH4200 Automobile User Manual


 
CONTROLS
Switches
Ignition Switch
The ignition switch is a three position, key-operated switch. The key
can be removed from the switch when it is in the OFF position.
OFF Engine off. All electrical circuits are off
except ACC. 12V.
ON Electrical circuits are on. Electrical equipment
can be used
START Electric starter is engaged by holding ignition
switch key in this position. Upon release,
the key will return to the ON position.
WARNING
LEAVING THE KEYS IN THE IGNITION CAN LEAD TO
UNAUTHORIZED USE OF THE VEHICLE RESULTING IN
SERIOUS INJURY OR DEATH. ALWAYS REMOVE THE
IGNITION KEY WHEN THE VEHICLE IS NOT IN USE.
Light Switch
Turn the headlights and tailights on by flipping the rocker switch up
(the ignition switch must be in the ON position). Flip the switch
down to turn the lights off.
Cargo Bed Light Switch (Optional)
Flip the rocker switch up to turn on and down to turn off.
Power Bed Lift Switch (Optional)
Push and hold the spring loaded rocker switch up to raise the bed
or down to lower the bed.
4-Wheel Drive Switch (On 4-wheel drive models only)
Flip the rocker switch up to engage 4-wheel drive at any time and
down to disengage 4-wheel drive.
Winch Switch (Optional)
Push and hold the spring loaded rocker switch to the left to unwind
the cable or push and hold to the right to wind in the cable.
25