Filter
Top Products
Then, without shutting off the engine, follow
these steps:
For the 3.8L V6 engine
the transaxle fluid
dipstick top is a round
loop with this symbol.
See Engine
Compartment Overview
on page 334 for more
information on location.
1. Pull out the dipstick and wipe it with a clean
rag or paper towel.
2. Push it back in all the way, wait three seconds
and then pull it back out again.
3. Check both sides of the dipstick, and read the
lower level. The fluid level must be in the
cross-hatched area.
4. If the fluid level is in the acceptable range,
push the dipstick back in all the way.
3.8L V6 Engine
345