Braun 34443 Automobile User Manual


 
Page 45
Third Row Seat Removal:
Note: Removal of the passenger
side section of the seat is prohib-
ited*. Policy detailed on previous
page.
1. From the rear of the vehicle, fold
down the back of the bench seat
(pull release strap #1).
2. Pull the release strap at the rear
of the seat (between seat base
and oor), and lift and fold (tip)
the seat forward. Note: Push
top of linkage rod forward to sta-
bilize seat (over center position)
3. Remove the bolt securing the
linkage arm to the oor-mounted
bracket.
4. Remove E-ring retaining clips
from the pivot pins securing the
front oor mounts.
5. Remove the pivot pins.
6. Carefully remove seat.
Third Row Seat Installation:
Reverse removal procedures.
SEAT REMOVAL AND INSTALLATION
Pivot Pin
E-Ring Retaining Clip
Linkage Arm
Securement Bolt
(40) Section(60) Section Controller Assembly